Floor

Floor mat

A dissipative floor mat specially developed for the electronics industry with high standards of reliability and quality.

The mat has excellent ESD properties, discharge to ground, systemresistans along with shoes and very low charges on the so-called "walking test" along with ESD shoes.

The mat is installed with ordinary flooring adhesive and connected to earth by steel bands placed under the mat to connect the lengths together.

The mat is available in different colors and comes in rolls of 1.5 x 25m = 37,5sqm.

Part No. 5380/Q - Grey (Standard)
Part No. 5390/Q - Light grey (Order item)
Part No. 5395/Q - Blue (Order item)


Buildable floor

This puzzle flooring is a flexible alternative for use at temporary EPA., or if you want to have the possibility for relocation. The floor is easy to install, sits firmly together without tape or glue thanks to interlocking systems and manages natural load carts and chairs. 

The floor can be supplied with edges and corner moldings that both protects the floor and makes it lies still.

Comes in pieces that are 469x469x8,5mm and is packed 12pcs per carton. Color: Light gray.

Part No. 5385B - Buildable floor, sq.m.
Part No. 5385L - Buildable floor, lipping
Part No. 5385H - Buildable floor, corner


Standing floor mats for good ergonomics

Floor mat with 6 mm thick conductive foam on the bottom, which reduces stress on feet, knees and back when standing.

Thanks to the conductive foam does not need further grounding mat if used on a regular ESD floor, unless the carpet is connected to the ground wire.

  • Size: 100x140cm 
  • Available in other sizes upon request

Part No. 5380/S - Light grey


Dissipative floor paint - Solvent based

Dissipative solventbased polyurethane floorpaint with excellent adhesive properties.

The surface is grounded traditionally with steel band - grounded to earth - which gives the floor its dissipative properties. The paint can be used on all types of hard floors, applied with a brush or roller.

  • Solvent based polyurethane paint.
  • Ready to use in 48 hours after application.
  • Durable surface with long lifetime.
  • Easy to complement or repair after your needs.
  • Color: Light Grey
  • Usage: 4sqm/kg for 2 application layers
  • Resistance to ground (Rg)= 105-107 Ohms 
  • System resistance to earth: 106-108 Ohms (depending on shoes)

              Part No. 1415CG001.7035.5 - Floor paint 5kg/can


              Dissipative floor paint - Water based

              Dissipative waterbased epoxy floorpaint with excellent adhesive properties.

              The surface is grounded traditionally with steel band - grounded to earth - which gives the floor its dissipative properties. The paint can be used on all types of hard floors, applied with a brush or roller.

              • Waterborne two-component paint. 
              • Ready to use in 24 hours after application. 
              • The surface is durable with long life. 
              • Simple to complemente or repair to your needs. 
              • Color: Light Grey.
              • Usage: 2,5sqm/kg for 2 application layers
              • Resistance to ground (Rg) = 105-107 ohms 
              • Systemresistans to earth: 106-108 ohms (depending on shoes)

                         

                        Part No. 1415CG001.7035.9 - Floor paint 10kg/can

                        Benchbrush

                        Conductive brush for cleaning table mats. The brush has 35mm long bristles with three rows of bristles and conductive shaft.

                        With our conductive brushes, you can thoroughly clean the most ESD sensitive components without endangering the high charges as ordinary brushes can generate. The handles are made of dissipative plastic and the brush is composed of conductive fibers. The conductive fibers are blended with natural bristles, to obtain the desired stiffness. Brush head length 160 mm.

                         

                        Part No. TEX-50


                        ESD Super Clean

                        Super Clean is a highly effective cleaning agent that can be used on any surface that resists water. It is designed to be used within EPA and cleans without leaving an insulating film. Takes very effectively removes oil, grease, flux residues, dirt and other contaminants.

                        Super Clean sprayed on the surface to be cleaned, wait a few seconds and wipe with a clean cloth. In very rough dirty surfaces, let it work longer and work harder surface with cloth alternatively sponges.

                        Material Safety Data Sheet - MSDS

                        Part No. 81117 - 
                        Superclean, 500ml, incl. Spray and sponge

                        Part No. 81118 - Superclean, 5liters/can


                        ESD-Polish

                        Is suited for treatment and maintenance of both insulating and conductive floors. The electric properties of the polish makes it both dissipative electrostatic charge and at the same time prevent the origin of static electricity. Triboelectric charges are reduced to 100 Volt or less. EDS-polish provides a shining, wear-resistant and anti-slip surface treatment protecting the floor, and at the same time significantly the floor maintenance, particularly for conductive floors.

                        Material Safety Data Sheed - MSDS

                        Part No. 50100 
                        5liters/can


                        ESD-Cleaner Floor

                        Is used for maintenance and wet cleaning of floors. It is advised against using other types of detergent as these might damage the electric properties of the floor.

                        Material Safety Data Sheet - MSDS
                         
                        Part No. 50101 
                        - 5liters/can


                        Polish-off

                        Is a wax removal detergent. It effectively dissolves all floor polish and wax without heavy swabbing.

                        Material Safety Data Sheet - MSDS

                        Part No. 50105
                         - 5liters/can